Factory Arm is blue/white to white/red
Factory Disarm is black/red to white at the drivers door module or most could be at the driver key cylinder also.
Joe GiallombardoI got a customers 2008 silvarado with a DNX-6180 it has a gmos-01 interface sounds great, customer complains that the turn signals don't indicate being on with a click from the flasher anymore. anyone ever seen this problem before
Nicholas FrazierThe blinkers arn't done through the module. There is instructions in the GMOS-01 package to retain the door chimes. I forgot what wires to hook up, but you hook them up to a relay and it causes the relay to click (giving you the clicking sound that was lo... moreThe blinkers arn't done through the module. There is instructions in the GMOS-01 package to retain the door chimes. I forgot what wires to hook up, but you hook them up to a relay and it causes the relay to click (giving you the clicking sound that was lost) when the blinkers are used.
November 4, 2011
Nicholas FrazierReading the manual ALWAYS helps. :)
AUDIBLE TURN SIGNAL
When the factory radio is removed the audible turn signal indicator is lost.
If that turn signal “clicking” is desired follow these steps:
1. Using a SPDT relay (Metra part # E-123), connect pin #85... moreReading the manual ALWAYS helps. :)
AUDIBLE TURN SIGNAL
When the factory radio is removed the audible turn signal indicator is lost.
If that turn signal “clicking” is desired follow these steps:
1. Using a SPDT relay (Metra part # E-123), connect pin #85 to the Black/White wire in the 12 pin harness.
2. . Connect pin #86 to the 12 volt constant wire on the 12 pin harness.
3 . Be sure to cover the other leads of the relay by either using female spade connectors or using tape to cover
the leads.
November 4, 2011
Joe Giallombardo
thank you much appreciated, i would have read the directions but i ended up having to fix this job from another installer.
THE MAKING OF....from yesterdays pumpkin video (click here to see http://www.youtube.com/watch?v=sOeuhWC8iQE&feature=relmfu ). A Rockford Fosgate Punch 8" Subwoofer in quite possibly the worlds first pumpkin speaker box. I spent way too much time today ...
Are you going to make your own box? I would suggest making a wedge design so the sub has enough space to fit and enough air space, if need be you could fiberglass to try and get the most room.
I would suggest doing the big 3 upgrade to have more current flow to power your system, you can also in addition add a high output alternator. What are you going to be running the highs off of?
About Me
I was first Introduced to the car Audio industry, when i was a young kid my father worked for a stereo shop as a teenager. So as a Teenager before i could even drive legally i would be working on cars starting out by putting in a radio and new immediately this is what i wanted to do, and after High School i went Mobile Dynamics and received top honors along with my Advanced MECP Certification
Doug Bernards
welcome everyone. glad you all joined us :)
Anthony Marzella
Well SoundMan... My car audio budget has been put to almost nil...I'm going to be a daddy again. Possibly twins...again. Life is good. :-)
Thane Townsend
Ahhhh Shittt! We are getting the site ready!!!
chris spoon
oh we are filming...starting our remodel today
Factory Arm is blue/white to white/red
Factory Disarm is black/red to white at the drivers door module or most could be at the driver key cylinder also.
Are you going to make your own box? I would suggest making a wedge design so the sub has enough space to fit and enough air space, if need be you could fiberglass to try and get the most room.
I would suggest doing the big 3 upgrade to have more current flow to power your system, you can also in addition add a high output alternator. What are you going to be running the highs off of?
Loading ...
