OK I'm tryin to put a radio in a moped I got and I hooked it all up and I blew the radio to shit and Idk why. Its running off the moped battery. Would it help if I got a bigger battery?
Daniel HoogendoornOK I'm tryin to put a radio in a moped I got and I hooked it all up and I blew the radio to shit and Idk why. Its running off the moped battery. Would it help if I got a bigger battery?
Daniel Hoogendoorn
Well I won't be trying the tweeter BC I put it all together and tryed it out and the tweeter is right where I set my arm down and it bugged the fuck out of me in 15 mins so ill be filling it in today. O well not hard to fix.
George BoydI thought about doing this with my galaxy note but up in the front of the console. But after thinking about it I realized I'm not going to want to pull my phone in and out when I get in the car. So I'm probably gonna pick up a 30 to 60 GB ipod classic thi... moreI thought about doing this with my galaxy note but up in the front of the console. But after thinking about it I realized I'm not going to want to pull my phone in and out when I get in the car. So I'm probably gonna pick up a 30 to 60 GB ipod classic this summer and mold it into the dash under my center console. Put a logo on the bottom left, and light it with LED's
March 7
Daniel Hoogendoorn
Nice ya I like mine. Ya I have to plug it in and pop it in all the time to but it looks sweat shit. I also like it that my arm doesn't lay on my iPod. That iPod classic will look kick ass, oldschool.
March 8
George Boyd
I already have a dock in the car for my ipod nano, but its not molded in and my 8 gig just doesn't hold enough
Daniel HoogendoornOK I got a question..... I have a pioneer DEH 4300UB deck and I'd like to have my iPod hooked up to the back end of the deck. Can I do that? Because I'd really like to have it hidden.
Daniel Hoogendoorn
Fuck then I think ill be getting a new deck in the future
February 1
Nicholas Frazier
The new Pioneers (the higher end ones) have rear USB - some dual rear USB - most have 4v outs, etc. The new units are pretty badass. For the price I'd go with teh 9400
Daniel Hoogendoorni want Amplified!!!!!!! haha i remeber when Doug was debating on if he should stop doing amplified. doug dont say you didnt say that! bc i have prof.lol I WANT AMPLIFIED!!!!!!!!!!!!!!!!!!
January 31
Daniel HoogendoornOK my brother is pissing me off! He's doesn't believe me on how to put a 2 channel amp in a ford ranger it only has 2 speakers. So can someone comment on how to hook it up, so I have prof I'm right.
January 30
Daniel Hoogendoorn
He says there needs to be speaker wires coming from the deck to the amp and then go to the speakers. No no no
January 30
Nicholas FrazierWell, he's not entirely wrong if there are high level inputs on the amplifier. That's one way of doing it. The other would be running RCAs from an aftermarket deck (or using a 4 ch loc then rcas) to the amp the speaker wire back to the speakers (or behind... moreWell, he's not entirely wrong if there are high level inputs on the amplifier. That's one way of doing it. The other would be running RCAs from an aftermarket deck (or using a 4 ch loc then rcas) to the amp the speaker wire back to the speakers (or behind the deck but i dont recommend that way if you're using a high pwoered amp/speakers.
January 30
Daniel Hoogendoorn
Yup thank you BC the only way to do it with his amp is to have RCA's. Wow now he says what do you do with the wire from the deck if he uses the RCA's.
Umm I don't even know just tape them?
January 30
Nicholas Frazier
Tell him to just touch a thick gauge power wire and ground to his tongue (j/k dont tell him to do it).
Daniel HoogendoornHey I got 2 Street edge. by Memphis
12" Subwoofers 8ohm 15-SE12S8 and I need a better amp. What would be the best one for alot of kick but still sound good?
January 18
Mike StrasserSince those speakers only handle 100w RMS each, I'd suggest about a 300w RMS 2 channel amp. Run your subs parallel at 4 ohm and bridge your amp.
If you want to keep it all memphis check out the power reference 16-PR2.100. That probably won't set you ... moreSince those speakers only handle 100w RMS each, I'd suggest about a 300w RMS 2 channel amp. Run your subs parallel at 4 ohm and bridge your amp.
If you want to keep it all memphis check out the power reference 16-PR2.100. That probably won't set you back too much either.
Motor City Fats
ipod touch's are not oldskool they are functional unlike them bulky tablets that do the same things cost too much just to give a bigger screen that dont fix in your pockets
Doug Bernards
DC Power alternator for The Mule. cant wait!
Anthony Marzella
Well SoundMan... My car audio budget has been put to almost nil...I'm going to be a daddy again. Possibly twins...again. Life is good. :-)
chris spoon
oh we are filming...starting our remodel today
Ya ya um Idk what type I'm getting yet. But i got Memphis street edge 8ohm 12 inch right now. I'd like to stay with 12 inch woofer. But these are getting old so ya
