» Equipment discussion

• Barry Schanz

  

  • 182 posts
   

  December 28, 2011 10:26:48 AM PST

  I need a way to get a subwoofer RCA output from the factory wiring on a 2011 F150 without nav and without the Sony audio package. The vehicle is all stock. My customer thinks there is a way to hook up his aftermarket amp so the bass isn't killed when the volume is turned up. We looked at the PAC AOEM-FRD24 but I need to be sure this works with the factory radio and it won't EQ the hell out of the bass at high volume.

   

  If there is a better solution please share. Thanks.

• Nicholas Frazier

  

  • 219 posts
   

  December 28, 2011 4:53:35 PM PST

  Have you tried a basic LOC? Or is the issue w the factory radio cutting lfe at higher volumes?
• Barry Schanz

  

  • 182 posts
   

  December 29, 2011 5:22:37 AM PST

  I haven't tried anything yet. Right now I'm going off of a few minutes of chatting with the customer while we searched Google. The PAC AOEM-FRD24 kit looks excellent as a budget solution. It attaches behind the stock head unit and basically does a Y connection with a 4 channel LOC. The AudioControl LC2i looks good too, but I don't have a dealer account to buy those cheap.