Hi,
Thanks for any info,I appreciate it very much.I have a 2011 toyota tacoma double cab.I ordered the rockford 4 channel mini amp,I can't believe how small these amps are!It's 75x4 watts,I have kenwood component set up front that will take the amp fine,I'm worried about the back pair of kenwood kfc-1362s speakers,I should have checked better as to what i was doing but i just decided i wanted a amp for my door speakers..The back speakers only handle 28 watts rms and 150 watts peak.I'm not sure if the back speakers would be able to handle the 75 watts,I got the 4 channel rca's coming in and the amp kit plus the amp is on the way.Anything i could do?I bought all nice stuff as far as wiring for this project but im worried now about the back speakers....Any help would be much appreciated!!The rockford amp is rockford pbr300x4.
Your back speakers should be fine man. Do yourself a favor and buy one more thing, a digital multi meter. Set it to AC Voltage arount the 200 mark. With the speakers unhooked from the amp, place the probes on the left speaker output if possible play a 100 hertz signal (99 can be found on bass melanic on itunes) and adjust your gain to 10 volts. Repeat for right. That will put you at 25w at a fairly aggressive tone. Set your crossover to HP ( I would do it for both front and rear) Need any help hit me up here. OOOO for the fronts to the same thing but set to 17v.... Reply with the size and kind of speaker. Might make some changes to Rx.
